GenieCut In-line Window Patcher
Window, Fold and Glue in One Pass
GenieCut in action
Innovative Design
The patented GenieCut uses an innovative film cutting system with a stationary knife. Traditional window patchers have servo motors that need to “home” before cycling again, but the GenieCut design allows it to cycle continuously. Moreover, the GenieCut does not come in contact with the boxes, allowing for a scratchless process!
This revolutionary technology increases productivity by reducing downtime. The in-line GenieCut window patching system does not have glue stencils or cylinders that need to be changed or removed for cleaning. The film accumulator (also called a buffer) is operated by vacuum pressure and there is no need to thread the film through a complicated series of rollers and nip points.
Virtually Zero Additional Footprint
The GenieCut is installed on the folder-gluer machine just before the folding function. Since the GenieCut is integrated onto your current folder-gluer, no additional space is required to add window patching to your production. The mobile frame allows the GenieCut to be easily installed and moved from one folder-gluer machine to another if needed.Additionally, operators can slide the applicator out of the way when not applying windows. Since it does not come in contact with or interfere with the folder-gluer machine operation, the GenieCut can be maintained or prepared for a future windowing batch while the folder-gluer is processing windowless boxes.
Reduced Downtime
With other window applicator systems, window/film misalignment results in significant downtime. It can take up to 20 minutes to clean glue off of the belt and components of other window applicators after an normal production run. With the GenieCut, downtime due to misalignment is a non-issue, since the belt and rollers do not come in contact with the folder gluer or box. After a production run a single wipe with a rag removes any glue residue on the glue gun tip.
Fast Initial Set-up & Change-over Time
Standard window patchers can take 2 to 4 hours to set up. The GenieCut usually takes less than 15 minutes to set up when recalling an existing job. After initial set-up it’s fast and easy to load additional rolls of film.
The touchscreen controller is user friendly and allows operators to define precise glue patterns. Each dot of glue is 6.2mm center to center. Adjusting the glue volume ensures an unbroken glue pattern once the film patch is placed. Film and glue patterns are stored in the controller reducing machine changeover time from hours to minutes.
